Slanted bags designed to go with twin shock Vulcans, but can be used with other models as well. Available in plain or studded styles and two widths (regular 6", chubby 9")

The C-Lift is 4 3/4 inches low, extends to a height of 20 inches, and lifts 950 lbs easily. The Lift slides under the motorcycle, which can be resting on it's side stand, from the right hand or carb side. The Lift rails are adjustable, side to side, about 1 1/2 inches and each of the two lifting rails have centering horns welded to the ends.

Easy on/off saddlebag mounts and supports, all-in-one.  Lockable, too!

"I have one for my 1500L's winter storage and maintenance." - Bald Eagle

Primed or Color-matched for the 1500 Classic.

Chrome floorboards to keep your pillions feet comfy.

This is the matching pillion pad for the Classic Solo saddle. You either need to use this pillion or have the stock pillion modified, as the stock part will not work with the Classic Solo.

This part is available with the same appearance options as the Classic Solo.

The CenterStandTM lift is a safe and simple tool that allows one person to lift the front or rear wheel of their motorcycle quickly and easily.  This allows the wheels to be turned and holds the bike upright and stable which allows the owner to perform a variety of tasks that were a hassle, if not impossible, to do before.

Available in black wall, raised white letters (RWL), and wide white walls (WWW) for most Vulcan cruisers.

Stock replacement and high output models

Stock replacement and high output models.

Fold-up Safety-Bar-Mount Highway Floorboards

Polished cast aluminum alloy floorboards have slip-resistant black rubber inserts, are approximately 4 5/8"W x 6"L. Alloy mounting clamps (with recessed bolts for a smooth, clean look) attach easily and securely to 1" diameter engine or case guards. Boards fold up when not needed. Adjustable angle.

J.C. Whitney catalog #77J (Spr'97), page S-8, part #06GJ3353U, sale $29.50, reg $37.50, 1 - Set includes 2 boards and clamps)

Carburetor re-jet and airbox reconfiguration kit. Removes the left side and under engine air intake. Claimed 5hp+ increase!

Our Vulcan 800 Classic Jiffy Floor Boards are cast from billet Aluminum which is then triple chrome plated or powder coated to give years of good looks and reliability. They are mounted on a chrome plated or powder coated steel bracket.

The Boards are designed to be installed into the original pivot mounts on your bike. Installation is easy and quick and allows you to change to the Floor Boards for long rides and then back to the OEM pegs in minimal time. Note that all hardware is polished stainless steel.

EVERYTHING OUR CUSTOMERS DEMAND:

• MADE IN USA
• EXCEPTIONALLY LOUD
• CONCEALABLE
• EASY INSTALLATION
• AFFORDABLE PRICE
• STAINLESS BRACKET FOR LITTLE HORN
• HEAVY DUTY POWDER COATED BRACKET FOR BIG HORN
• STAINLESS AND CHROME CONSTRUCTION
• ALL HARDWARE INCLUDED
• UTILIZES EXISTING WIRING, POSITIVE, GROUND
• BIG HORN HAS CHROMED SOLID BRASS TRUMPET

Braids are available in one or two colors from your choice of 18 colors or you may have a third color added to your braid as a "Tie-Off".  You may have fringe of up to 16" or choose no fringe.  Braids are also available with bolos,  Iron Braids are quality braided levers manufactured to the highest standards.

Send your existing levers to have them braided.  When you ship your own levers, Iron Braid promises 2 day in shop turnaround.

Need to replace worn or damaged levers for your foreign bike?  Iron Braid, in most cases, can provide both black and polished aluminnum levers.  New lever sets take a minimum of 7-10 days for delivery and are subject to availability.  You can buy new levers plain or have them braided.

Iron Braid products also include key chains, zipper pulls, braided conchos, and others!  They attend most major bike rallys.

(Submitted by: Mark Kowalski, VROC 1409)

"The Floor boards for the rear that are listed in the catalog #06xe9188y for 49.98 are junk. You have to do some modifications to get them to work. But I think that they aren't worth the money, very cheap looking. Good part is that J.C.Whitney has a 100% satisfaction policy"

Ken VROC#555

Kawasaki has a number of accessories for our Vulcans, some of which are sourced from other manufacturers.

Listings and part numbers are at Fire & Steel

Thanks to Francis Colligan

Automobile-style flashers for your motorcycle.

Turns your rear turnsignals into additional brake lights whenever your turn signals are not active.

Advanced design is legal in all 50 States. Kriss also has a lower cost unit - FCD.

Very large rigid bags with quick disconnect and weather-tight seal.

Note: These bags are not believed to be compatible with F&S dresser bars.

Rigid saddlebags with a leather-like appearance. Hinged, key-locking covers; weather-proof seals.